Beverage display cabinets do not refrigeration causes and solutions

First, the refrigeration system failure

If the beverage display cabinet is not cooling, it is likely that the refrigeration system has a problem. Check whether the compressor, expansion valve, condenser and other components of the refrigeration system are damaged or clogged, and whether they need to be cleaned or replaced, all of which may lead to the beverage display cabinet is not cold. If it is confirmed that the refrigeration system is faulty, it is recommended to contact a professional maintenance personnel to deal with.

Second, too much loading

If the beverage display cabinet is placed with too many beverages, exceeding the design load, it will lead to the refrigeration system can not meet the demand and can not be properly cooled. In this case, reducing the number of drinks is the key to solving the problem. In addition, it is also necessary to frequently clean the condenser and radiator inside the beverage display cabinet to ensure that they are not blocked by dust and debris.

Third, the ambient temperature is too high

The operation of the beverage display cabinet requires a relatively stable temperature environment, which requires attention to the ambient temperature. If the beverage display case is placed in direct sunlight, or the ambient temperature is too high, then it will also cause the beverage display case not to be cold. At this time, you need to put the beverage display cabinet in a relatively cool place, and keep the stability of the surrounding environmental temperature.

Fourth, the refrigeration circulatory system failure

If the beverage display cabinet everything is normal, but the cause of refrigeration has not been found, then it may be the refrigeration circulatory system failure. This time you need to check the refrigeration system piping, circuitry, mechanical elements are working properly, as well as some electronic and electrical wiring is connected to each other. If all of the above are normal, you need to carry out the unit plus replenishment of liquid, check whether the unit is blocked by dirt.